8060cdn Light Production (Color)
•+ A3 Printers supporting up to 11″ x 17″
+ High Speeds up to 55 ppm Color & 60 ppm B&W
+ Media Capacity (std/max): 1,150/7,150 sheets
+ 9” Color TSI – Intuitive User Interface
+ High Quality Output up to 1200 x 1200 dpi
+ HyPAS-enabled, and KNM & KFS Ready
Click below to download PDF.
Windows
Download the driver and unzip the file. Once the driver is unzipped you will need to run the installation file shown below.
Click on the folder until you see en and open.
Look for the file name KmInstall and double click to open. Windows will ask you if you want to allow this program to make changes, select yes to continue
Once the Program opens click Accept to continue with the installation
Click OK to continue
Click Custom Install
Here you should see your printer show up in the list below, if you do not see your device you can type in the IP address in the box that says “Search Devices”.
MAKE SURE TO USE THE ###.###.###.### STYLE IP ADDRESS.
If the device is still not showing up it means your device is either not connected to the network or is not on the same network your computer is on.
Click on your device and then click the top arrow to add it to the install list
Click “KX Driver” and then click the bottom arrow to add it to the install list
Click Install
Click “No, I do not want to take part in this feature”
Once the install is done click all three boxes so only Print test page is checked and click finish.
Once you verify the test page printed close out of the program and you are all finished.
Download and unzip the file
open the dmg file
select the pkg file
Click continue
Click continue
Click agree
Click Install
Type in your password and click install software
Click close
Open System Preferences and select printers and scanners
Click the plus button
Click add printer or scanner
Select IP
Select IPP in the drop down box and change to LPD
Type in the Ip address of your Copier or Printer
Click under name and change the name to your desired printer name and click add
Select the options your printer has and click ok
You have now finished and able to print using the Kyocera driver
4060dn Light Production (B/W)
+ A3 Printers supporting up to 11″ x 17″
+ High Speeds up to 60 ppm B&W
+ Media Capacity (std/max): 1,150/7,150 sheets
+ 9” Color TSI – Intuitive User Interface
+ High Quality Output up to 1200 x 1200 dpi
+ HyPAS-enabled, and KNM & KFS Ready
Click below to download PDF.
Windows
Download the driver and unzip the file. Once the driver is unzipped you will need to run the installation file shown below.
Click on the folder until you see en and open.
Look for the file name KmInstall and double click to open. Windows will ask you if you want to allow this program to make changes, select yes to continue
Once the Program opens click Accept to continue with the installation
Click OK to continue
Click Custom Install
Here you should see your printer show up in the list below, if you do not see your device you can type in the IP address in the box that says “Search Devices”.
MAKE SURE TO USE THE ###.###.###.### STYLE IP ADDRESS.
If the device is still not showing up it means your device is either not connected to the network or is not on the same network your computer is on.
Click on your device and then click the top arrow to add it to the install list
Click “KX Driver” and then click the bottom arrow to add it to the install list
Click Install
Click “No, I do not want to take part in this feature”
Once the install is done click all three boxes so only Print test page is checked and click finish.
Once you verify the test page printed close out of the program and you are all finished.
Download and unzip the file
open the dmg file
select the pkg file
Click continue
Click continue
Click agree
Click Install
Type in your password and click install software
Click close
Open System Preferences and select printers and scanners
Click the plus button
Click add printer or scanner
Select IP
Select IPP in the drop down box and change to LPD
Type in the Ip address of your Copier or Printer
Click under name and change the name to your desired printer name and click add
Select the options your printer has and click ok
You have now finished and able to print using the Kyocera driver
7240/6235/6230cdn (Color)
+ Speeds up to 42 ppm Color & B&W
+ High Quality Output at 1200 x 1200 dpi*
+ Up to 5 Line LCD Display
+ Media Capacity (std/max): 600/2,100 sheets
+ KFS & KNM Ready
Click below to download PDF.
Windows
Download the driver and unzip the file. Once the driver is unzipped you will need to run the installation file shown below.
Click on the folder until you see en and open.
Look for the file name KmInstall and double click to open. Windows will ask you if you want to allow this program to make changes, select yes to continue
Once the Program opens click Accept to continue with the installation
Click OK to continue
Click Custom Install
Here you should see your printer show up in the list below, if you do not see your device you can type in the IP address in the box that says “Search Devices”.
MAKE SURE TO USE THE ###.###.###.### STYLE IP ADDRESS.
If the device is still not showing up it means your device is either not connected to the network or is not on the same network your computer is on.
Click on your device and then click the top arrow to add it to the install list
Click “KX Driver” and then click the bottom arrow to add it to the install list
Click Install
Click “No, I do not want to take part in this feature”
Once the install is done click all three boxes so only Print test page is checked and click finish.
Once you verify the test page printed close out of the program and you are all finished.
Download and unzip the file
open the dmg file
select the pkg file
Click continue
Click continue
Click agree
Click Install
Type in your password and click install software
Click close
Open System Preferences and select printers and scanners
Click the plus button
Click add printer or scanner
Select IP
Select IPP in the drop down box and change to LPD
Type in the Ip address of your Copier or Printer
Click under name and change the name to your desired printer name and click add
Select the options your printer has and click ok
You have now finished and able to print using the Kyocera driver
PA6000X/5500/5000/4500/3260cdn (B/W)
+ Speeds up to 62 ppm B&W
+ High Quality Output up to Fine1200 dpi
+ Up to 5 Line LCD Display
+ Media Capacity (std/max): 600/2,600 sheets
+ KFS & KNM Ready
Click below to download PDF.
Windows
Download the driver and unzip the file. Once the driver is unzipped you will need to run the installation file shown below.
Click on the folder until you see en and open.
Look for the file name KmInstall and double click to open. Windows will ask you if you want to allow this program to make changes, select yes to continue
Once the Program opens click Accept to continue with the installation
Click OK to continue
Click Custom Install
Here you should see your printer show up in the list below, if you do not see your device you can type in the IP address in the box that says “Search Devices”.
MAKE SURE TO USE THE ###.###.###.### STYLE IP ADDRESS.
If the device is still not showing up it means your device is either not connected to the network or is not on the same network your computer is on.
Click on your device and then click the top arrow to add it to the install list
Click “KX Driver” and then click the bottom arrow to add it to the install list
Click Install
Click “No, I do not want to take part in this feature”
Once the install is done click all three boxes so only Print test page is checked and click finish.
Once you verify the test page printed close out of the program and you are all finished.
Download and unzip the file
open the dmg file
select the pkg file
Click continue
Click continue
Click agree
Click Install
Type in your password and click install software
Click close
Open System Preferences and select printers and scanners
Click the plus button
Click add printer or scanner
Select IP
Select IPP in the drop down box and change to LPD
Type in the Ip address of your Copier or Printer
Click under name and change the name to your desired printer name and click add
Select the options your printer has and click ok
You have now finished and able to print using the Kyocera driver
5026/5021cdw/2100cwx (Color)
+ Speeds up to 27 ppm Color & B&W
+ High Quality Output at 1200 x 1200 dpi*
+ 2 Line LCD Display
+ Media Capacity (std/max): 300/550 sheets
+ Standard Wireless & Wi-Fi Direct
+ KFS & KNM Ready
Click below to download PDF.
Windows
Download the driver and unzip the file. Once the driver is unzipped you will need to run the installation file shown below.
Click on the folder until you see en and open.
Look for the file name KmInstall and double click to open. Windows will ask you if you want to allow this program to make changes, select yes to continue
Once the Program opens click Accept to continue with the installation
Click OK to continue
Click Custom Install
Here you should see your printer show up in the list below, if you do not see your device you can type in the IP address in the box that says “Search Devices”.
MAKE SURE TO USE THE ###.###.###.### STYLE IP ADDRESS.
If the device is still not showing up it means your device is either not connected to the network or is not on the same network your computer is on.
Click on your device and then click the top arrow to add it to the install list
Click “KX Driver” and then click the bottom arrow to add it to the install list
Click Install
Click “No, I do not want to take part in this feature”
Once the install is done click all three boxes so only Print test page is checked and click finish.
Once you verify the test page printed close out of the program and you are all finished.
Download and unzip the file
open the dmg file
select the pkg file
Click continue
Click continue
Click agree
Click Install
Type in your password and click install software
Click close
Open System Preferences and select printers and scanners
Click the plus button
Click add printer or scanner
Select IP
Select IPP in the drop down box and change to LPD
Type in the Ip address of your Copier or Printer
Click under name and change the name to your desired printer name and click add
Select the options your printer has and click ok
You have now finished and able to print using the Kyocera driver
3860/3655/3645/3145dn (B/W)
+ Speeds up to 62 ppm B&W
+ 7” Color TSI – Intuitive User Interface
+ Media Capacity (std/max): 600/2,600 sheets
+ HyPAS-enabled, and KNM & KFS Ready
+ Data Security Kit (E)
Click below to download PDF.
Windows
Download the driver and unzip the file. Once the driver is unzipped you will need to run the installation file shown below.
Click on the folder until you see en and open.
Look for the file name KmInstall and double click to open. Windows will ask you if you want to allow this program to make changes, select yes to continue
Once the Program opens click Accept to continue with the installation
Click OK to continue
Click Custom Install
Here you should see your printer show up in the list below, if you do not see your device you can type in the IP address in the box that says “Search Devices”.
MAKE SURE TO USE THE ###.###.###.### STYLE IP ADDRESS.
If the device is still not showing up it means your device is either not connected to the network or is not on the same network your computer is on.
Click on your device and then click the top arrow to add it to the install list
Click “KX Driver” and then click the bottom arrow to add it to the install list
Click Install
Click “No, I do not want to take part in this feature”
Once the install is done click all three boxes so only Print test page is checked and click finish.
Once you verify the test page printed close out of the program and you are all finished.
Download and unzip the file
open the dmg file
select the pkg file
Click continue
Click continue
Click agree
Click Install
Type in your password and click install software
Click close
Open System Preferences and select printers and scanners
Click the plus button
Click add printer or scanner
Select IP
Select IPP in the drop down box and change to LPD
Type in the Ip address of your Copier or Printer
Click under name and change the name to your desired printer name and click add
Select the options your printer has and click ok
You have now finished and able to print using the Kyocera driver